Configure jobsite monitoring
TrueLook must turn on Jobsite Monitoring for your project first. If you need help with Jobsite Monitoring, contact TrueLook Support.
On the Dashboard, find the project with Jobsite Monitoring turned on. Click Configure monitoring on the project. If no alert is set up yet, the panel is titled Jobsite Monitoring alert and says "No Jobsite Monitoring alerts". Click Create alert.
Create Jobsite Monitoring alert opens on Select cameras. Under Jobsite Monitoring camera offline alerts, choose how long to wait if a camera loses power or goes offline. Do not notify me is one of the choices. Select at least one active camera. The page says offline cameras will not alert. If you select a PTZ camera, choose how it behaves during monitoring hours. One choice is "Let the camera be operated as normal." Two optional settings are "When a JSM alarm occurs, automatically pre-fetch the associated security recording" and "JSM guard tour".
Click Next step. Notify users is titled Event alert notifications. The actions are Notify customer call tree members, Text call tree when an alert is canceled, Text call tree when police are dispatched, Notify monitoring center, Alert for non-threat events, and Play pre-recorded message on horn - if present. Follow-up text messages go to accepted SMS call-tree contacts, and customer call-tree notifications must be enabled before those texts are sent. A pre-recorded message can be selected for the horn.
Enter a 4-digit PIN at the bottom of Notify users. The PIN must be provided when cancelling an alert, and it is sent to the selected users when an alert is acknowledged by text. Next step stays unavailable until the PIN is entered, so the later steps stay closed.