24×7 rotating stream
24×7 Rotating Stream cycles through your cameras’ live views, providing real-time footage from each jobsite. It runs uninterrupted, so you can leave the stream on all day for websites, social media, or offices.
It’ll switch between cameras added to the rotation, so adjust as necessary to provide the best possible show.
Access 24×7 Rotating Streams from the top-right gear icon. Select Sharing Center, and then Live Streams from the upper-left tabs.
You must have administrator permissions to access the sharing center. If you’re unable to access the sharing center, contact your account administrator.
Create a 24x7 Rotating Stream
To start, click the Live Stream button when under the Live Streams tab. This brings up the Create 24×7 Rotating Stream window, where you can edit the options on your 24×7 Rotating Stream.
Configure the options of your Recent Image Slideshow on the left side of the window.
- Slideshow Name: The name for the slideshow.
- Billing Project: The project the stream link is attached to. Once the selected project ends, the stream link is deactivated and needs to be swapped to another project.
- Start/End hour: Choose the hours of the day the slideshow can be accessed.
- Day of week: Choose the days the slideshow can be accessed.
- Select layout type: Layout of how the camera(s) appear to a viewer.
- Misc. Options:
- Full Screen: Slideshow will automatically take the full size of the browser screen.
- Show project name: Shows project name on the slideshow.
- Show camera name: Shows the camera’s name on the slideshow.
- Show Project Location: Shows the city and state from the camera’s address.
- Set Expiration: Choose a day for slideshow link to expire. Note that it’ll expire at 11:59 PM Eastern Time the day of expiration.
- Stream Timer: Amount of time before the slideshow changes.
- Optional Password: Require a visitor to enter a password to access the slideshow.
- Enable recent image slideshow link: Makes the slideshow accessible or inaccessible.
- Optional Logo: Can select a logo image that’ll be included in the slideshow.
On the right side of the window, you can search for your camera(s) to include in the rotation:
- You can search for a project or camera by entering at least three characters in the Search bar.
- Projects are listed alphabetically under the Media Source header.
- You can use the upward/downward arrows to expand the project row to access cameras per project
- Below the project rows are the applicable cameras. Click the checkbox next to each camera to select it.
When there is no media available,an icon will appear with one of the following explanations: “No media,” “No time lapses,” or “No photo albums.”
As you select camera(s), they will appear in the Slideshow Cards section at the bottom of the window.
Remove media from the slideshow by clicking the trash can icon. Rearrange the slideshow with the “Rearrange Slides” button.
Arrows will appear on the left and right side of the Slideshow Cards section to navigate between the selected media.
When finished, click Save.
The following confirmation message will display, and the slideshow link is created.
When a new slideshow link is created, a blue dot will appear next to the new Slideshow Link for visibility amongst other links on the table.
Only one 24x7 Rotating Stream link can be active at any given time. If more than one live stream slideshow link is needed, contact support@truelook.com. You can have as many 24x7 Rotating Streams as you want.
Ellipses Options
You can disable or enable access for a link by using the toggle option in the Available column.
When you disable access for a slideshow link by using the toggle option, the toggle will appear in the grey state and a confirmation message displays.
When you activate access for a slideshow link by using the toggle option, the toggle will appear in the green state and a confirmation message displays.
Menu Options
Click the ellipses menu from the Recent Image Slideshow table and view the options: Edit, Copy Link, Embed Code, Duplicate, and Delete.
To edit an existing link, click Edit and the Edit 24×7 Rotating Stream window will open.
You can make any changes, then click Save once finished. When you save the edits, a confirmation message will appear.
You can copy a link to send to intended visitors.
When you click Copy Link, a confirmation message will appear when the link has been copied to your clipboard.
You can embed your slideshow into your website to share the camera with visitors.
Clicking Embed Code opens a window to copy the embed HTML code.
Click the Copy button to copy the displayed HTML code to your clipboard. Then, provide the HTML code to your web developer to add to your website.
The code will work as long as the sharing link is active. If the sharing link is deleted, disabled, or expired, your embed code will no longer work.